Legend Tuned · Chip Tuning

Mercedes-Benz E-Serisi (W211) E 350 272 HP Chip Tuning

  • 2002–2009
  • Petrol
  • 272 HP · 350 Nm
  • ECU: Bosch ME9.7

Target with Legend Tuned Stage 1: 290 HP / 370 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +18 HP +7%
290 HP Stock 272 HP · 200 → 213 kW
Stock
272 HP
Stage 1
290 HP
Torque +20 Nm +6%
370 Nm Stock 350 Nm
Stock
350 Nm
Stage 1
370 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage 1 comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

Mercedes-Benz E-Serisi (W211) E 350 272 HP — stock and Stage figures
Value Stock Stage 1
Power272 HP290 HP
Power (kW)200 kW213 kW
Torque350 Nm370 Nm
Power gain—+18 HP (+7%)
Torque gain—+20 Nm (+6%)
Vehicle
Mercedes-Benz E-Serisi (W211)
Engines
E 350
Years
2002–2009
Fuel
Petrol
ECU
Bosch ME9.7
Stage 2
Not listed for this engine

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 7 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Emission Systems

Emission system solutions for track and motorsport projects.

02

Stage 2 hardware, peace of mind and process

After Stage 1

Stage 2 is not listed for this engine

There's no meaningful Stage 2 figure for this engine; most of the gain comes with Stage 1 software. For livelier throttle response and a deeper intake sound, you can complement Stage 1 with the Custom Sport Filter Kit.

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — boost pressure, ignition and air/fuel ratio are recorded and checked on a road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

Mercedes-Benz E-Serisi (W211)

Other engines in the same generation

All engines table

Other E-Serisi generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 290 HP +18
Book an appointment